Are you a lake home property or cabin owner that has issues with lake muck, weeds, algae & floating debris? Searching for ways to eliminate, reduce & completely manage your shoreline without using harmful chemical herbicides?
Is your property located in a channel, canal, cove or bay where the water has stagnated due to lack of circulation?
No matter how severe your current situation. The AquaThruster has proven itself time and time again to be the fastest, most effective way to manage your shoreline with little to no work.
We offer 4 different motor sizes and 6 different mounting configurations to best fit any application.
Motors available in both 110v and 220v.
All units come with a 50ft power cord but can also be upgraded to a 100′ – 150′ – 200′ or more.
Efficient / Low Power Use: Highest efficiency design for lower power consumption. Reduces operating costs over the entire life of the unit. The ½ hp draws 5 amps – the ¾ hp draws 6.5 amps, and the 1 hp draws 11 amps
Rugged Motor: Environmentally friendly design with a hard-face internal mechanical seal for protection against leaks. Long-life top and bottom ball bearings. Flood oil lubricated for excellent heat dissipation.
Corrosion Resistant: Superior dependability in salt-water or other corrosive environments. All external metal motor, float, and hardware components are of stainless steel composition and protected by a sacrificial zinc anode.
Low Maintenance: Clean the motor housing once or twice per year and replacing the sacrificial zinc anode when visibly corroded.
Fully Tested: ETL listed to stringent UL and CSA Safety Standards
Dependable: Backed by a 2 year warranty on 1/2-1HP
Aqua Thruster FAQ’s
Q. How long does the 360 Oscillator run in one direction before oscillating to its next position?
A. The simple way to remember this is: 20/20 (20 minutes of operation followed by a 20 degree oscillation).
Q. Can I use my own extension cord?
A. Yes, you may use a 12 gauge cord up to 50′ with a 1 hp unit and 100′ with either the 1/2 or 3/4 hp units.
Please Note: If you are using the Free Standing Frame or the Float Mount option, we strongly encourage you to have enough uninterrupted cord to run your unit safely along your waterfront.
Q. Can I easily run both my 360 Oscillator and my Aqua Thruster with only one outlet?
A. Yes, all you need to add is a dual prong timer and both of your machines can be programmed to start/stop on command.
Q. How often should I run my Aqua Thruster?
A. When you first install your unit, you may want to run it continuously for 1-2 days, followed by a periodic schedule based on your particular needs.
Q. Can I use the Aqua Thruster in brackish or salt water?
A. Yes, we have thousands of satisfied customers currently using our products in all different water conditions across North America and Europe.
Q. Are you only an online store or do you have a storefront?
A. We have a storefront too! We have over 7000 sq feet loaded with everything imaginable for your waterfront.
Q. Where are you located?
A. We are located in New Hope, Minnesota (Twin Cities Metro Area).
Our physical address is: 5701 International Pkwy New Hope, MN 55428
Q. Do you offer special volume pricing?
A. Yes! Call us and learn more about what constitutes a volume order.
Visit our online store for more info, pricing, and to purchase or call 763-551-1441