Aqua Thruster With Float Mount

$1,249.00$3,199.00

AquaThruster with Float Mount

SKU: N/A Category:

Description

The AquaThruster with the float mount. This is the complete unit package.

Float Mount:

The float option is ideal if you don’t have a dock/pier and want to blast algae and floating debris as the Aqua Thruster sits two feet below the float. The float option for the Aqua Thruster works by allowing you to tie the system to something on the bank.

Motors available in both 110v and 220v.

All units come with a 50ft power cord but can also be upgraded to a 100′ – 150′ – 200′ or more.

Efficient / Low Power Use: Highest efficiency design for lower power consumption. Reduces operating costs over the entire life of the unit. The ½ hp draws 5 amps – the ¾ hp draws 6.5 amps,  and the 1 hp draws 11 amps

Rugged Motor: Environmentally friendly design with a hard-face internal mechanical seal for protection against leaks. Long-life top and bottom ball bearings. Flood oil lubricated for excellent heat dissipation.

Corrosion Resistant: Superior dependability in salt-water or other corrosive environments. All external metal motor, float, and hardware components are of stainless steel composition and protected by a sacrificial zinc anode.

Low Maintenance: Clean the motor housing once or twice per year and replacing the sacrificial zinc anode when visibly corroded.

Fully Tested: ETL listed to stringent UL and CSA Safety Standards

Dependable: Backed by a 2 year warranty on 1/2-1HP

Additional information

Weight 37 lbs
Dimensions 26 × 14 × 14 in
HP of Unit

1/2 HP, 3/4 HP, 1 HP, 1 HP (220 volt), 2 HP (220 volt)

Cord Length

50 foot, 100 foot, 150 foot, 200 foot

Reviews

There are no reviews yet.

Be the first to review “Aqua Thruster With Float Mount”

You may also like…