AquaThruster with Truss Dock Mount
Aqua Thruster With Truss Dock Mount
$1,354.00 – $3,304.00
The AquaThruster with the Truss Dock mount. This is the complete unit package.
Truss Dock Mount:
This “sandwich style” mount attaches to the side of any truss style dock. It can be moved anywhere around your dock very easily so you can cover more area effectively. Mounts on any part of your dock in less than 2 minutes!
Motors available in both 110v and 220v.
All units come with a 50ft power cord but can also be upgraded to a 100′ – 150′ – 200′ or more.
Efficient / Low Power Use: Highest efficiency design for lower power consumption. Reduces operating costs over the entire life of the unit. The ½ hp draws 5 amps – the ¾ hp draws 6.5 amps, and the 1 hp draws 11 amps
Rugged Motor: Environmentally friendly design with a hard-face internal mechanical seal for protection against leaks. Long-life top and bottom ball bearings. Flood oil lubricated for excellent heat dissipation.
Corrosion Resistant: Superior dependability in salt-water or other corrosive environments. All external metal motor, float, and hardware components are of stainless steel composition and protected by a sacrificial zinc anode.
Low Maintenance: Clean the motor housing once or twice per year and replacing the sacrificial zinc anode when visibly corroded.
Fully Tested: ETL listed to stringent UL and CSA Safety Standards
Dependable: Backed by a 2 year warranty on 1/2-1HP
|Dimensions||26 × 14 × 14 in|
|HP of Unit||
1/2 HP, 3/4 HP, 1 HP, 1 HP (220 volt), 2 HP (220 volt)
50 foot, 100 foot, 150 foot, 200 foot